How to Make Your Own TabaSquishy at Home: DIY Kits and Pigment Set Guide

Quick Answer

Making your own TabaSquishy at home is easier than you think: start with a DIY squishy kit that includes silicone and a pigment set, then follow a simple mix, mold, and cure process. For beginners, we recommend the TabaSquishy DIY Studio Squishy Kits & Supplies, which provide everything you need to create custom squishy colors and shapes without guesswork.

Creating your own squishy at home is a fun way to get exactly the color, shape, and texture you want—and it’s easier than you might expect. With a DIY squishy kit and a silicone pigment set, you can mix custom colors and pour your own designs, all while enjoying the satisfying slow rebound that TabaSquishy fans love.

This guide walks you through the entire process, from choosing the right kit to curing your finished squishy. Whether you’re a first-timer or looking to refine your technique, you’ll find practical steps, common mistakes to avoid, and tips for getting the most out of your homemade squishy ideas.

What You Need to Start Your DIY Squishy Project

Before you start, gather the essentials: a DIY squishy kit (which typically includes silicone base, hardener, and mixing tools), a silicone pigment set for coloring, and a clean, well-ventilated workspace. Some kits come with molds, but you can also use silicone ice cube trays or other flexible molds you already have.

The TabaSquishy DIY Studio Squishy Kits & Supplies are designed to be beginner-friendly, with pre-measured components and clear instructions. If you’re buying separate supplies, make sure the silicone is food-grade and safe for skin contact—this ensures your finished squishy is soft, durable, and safe to handle.

• Check that your workspace is dust-free to avoid bubbles in the silicone.
• Wear gloves to keep oils from your skin out of the mixture.

Choosing the Right Silicone and Pigment Set

The quality of your silicone matters: food-grade silicone gives a smooth, creamy texture and slow rebound, just like the ready-made TabaSquishy toys. Look for a two-part liquid silicone (base and hardener) that cures at room temperature—this is the most forgiving for beginners.

For colors, a squishy silicone pigment set lets you mix custom shades by adding small amounts of pigment to the silicone base. Start with a drop or two, mix thoroughly, and test on a small piece before pouring your full mold. Remember that colors can shift slightly after curing, so keep notes on your ratios for consistent results.

• Use a toothpick to add tiny amounts of pigment—you can always add more, but you can’t take it out.

Mixing, Pouring, and Curing: Step-by-Step

Once your materials are ready, measure the silicone base and hardener exactly according to the kit’s instructions. Mix slowly and scrape the sides and bottom of the container to ensure even blending—this prevents uncured spots. Add your pigment during mixing, then pour the mixture into your mold in a thin stream to minimize air bubbles.

After pouring, tap the mold gently on the table to release trapped air, then let it cure undisturbed for the time specified by your kit. Curing times vary, so don’t rush it—if you demold too early, your squishy may lose its shape. Once cured, carefully pop it out and enjoy your custom creation.

• If you see bubbles, use a toothpick to pop them before the silicone sets.

DIY Squishy in 5 Steps

1. Prepare your workspace and materials: Lay out your DIY squishy kit, pigment set, molds, and mixing tools in a clean, well-lit area. Make sure you have gloves and a dust-free surface. Checkpoint: everything is within reach and your area is clean.
2. Mix the silicone base and hardener: Follow the kit’s ratio exactly. Stir slowly and thoroughly, scraping the sides and bottom of the container to avoid unmixed silicone. Mistake to avoid: rushing the mix—uneven blending causes soft spots.
3. Add pigment for custom colors: Use a toothpick to add a small drop of pigment to the mixture. Stir well, then test the color on a small piece before adding more. Remember: you can add more, but you can’t remove it.
4. Pour into your mold: Pour the silicone in a thin stream to minimize bubbles. Tap the mold gently on the table to release trapped air. Checkpoint: no large bubbles visible on the surface.
5. Cure and demold: Let the silicone cure for the full time specified in your kit. Resist the urge to demold early—patience gives a clean shape. Mistake to avoid: demolding too soon can deform your squishy.

TabaSquishy Products That Help Your DIY Project

• Puppy Pal Dumpling Squishy: This handmade puppy pal dumpling taba squishy made from food-grade silicone, features a soft, easy-to-squeeze texture with a smooth, creamy feel and slow rebound for deep relaxation. If you’re making your own squishy, studying a ready-made one like this helps you understand the ideal texture and rebound to aim for. It also serves as a great reference for the final feel you want to achieve.
• octopus-squ-236bd58c59b15361546c838d-4412">Blingbling Fuchsia Octopus Taba Squishy: This handmade blingbling transparent-fuchsia octopus taba squishy made from food-grade silicone, features a soft, easy-to-squeeze texture with a smooth, creamy feel and slow rebound for deep relaxation. The transparent finish shows how pigment can be used to create see-through effects. Use it as inspiration for mixing translucent colors in your own DIY silicone pigment set.

Making your own TabaSquishy at home is a rewarding project that lets you express your creativity. With a reliable DIY squishy kit, a silicone pigment set, and a little patience, you’ll be crafting custom squishies in no time. Happy squishing!